Epol vacancies in Berlin are available for job seekers with experience in production support, forklift operation and general maintenance. The animal-feed business is recruiting three General Workers, one Forklift Driver and two Maintenance Handymen for its mill operations.
These opportunities require candidates who can work safely, follow production procedures and contribute to an efficient working environment. Grade 12 is required for all three job categories, although the Forklift Driver and Maintenance Handyman positions have additional licence and experience requirements.
There are two different closing dates. Applications for the Maintenance Handyman positions close on 18 September 2026, while the General Worker and Forklift Driver applications close on 25 September 2026. See section 8 below to apply.
Table of Contents
1. About Epol
Epol operates in the animal-feed sector, and the advertised Berlin positions support the effective running of its mill operations. A feed mill relies on coordinated production, raw-material handling, stock control, equipment operation, maintenance and quality-management processes.
The available roles contribute to different parts of this system. General Workers help maintain production flow, the Forklift Driver supports product movement and customer loading, and Maintenance Handymen keep buildings, equipment and essential site infrastructure in working condition.
Safety, feed quality, accurate recordkeeping and responsible teamwork are important throughout the operation. Candidates who understand these expectations and meet the position-specific requirements may consider applying through the official recruitment platform.
2. Overview of the Available Epol Vacancies
Epol is recruiting for three categories of employment at its Berlin operations. Together, the advertisements represent six available positions.
| Position | Number of vacancies | Closing date |
| General Worker | 3 | 25 September 2026 |
| Forklift Driver | 1 | 25 September 2026 |
| Maintenance Handyman | 2 | 18 September 2026 |
| Total | 6 | Deadlines differ |
Although the positions are based at the same operation, their responsibilities are different. General Workers will support daily mill production, the Forklift Driver will move and load bagged products, and Maintenance Handymen will carry out repairs across the site.
Candidates should apply for the role that best matches their qualifications, licences and practical experience.
3. General Worker Positions x 3
Epol is looking for three General Workers to support production activities and help keep the mill operating effectively.
This position may suit candidates who understand basic production processes, can complete physical tasks and are comfortable working according to health and safety procedures.
Main responsibilities
The appointed General Workers will be expected to:
- Ensure that the resources needed for production are available at the correct time.
- Report mechanical or electrical problems that could interrupt operations.
- Communicate faults to the control room or responsible supervisor.
- Record production information accurately, including tipping logs where required.
- Respond to manual production bottlenecks, such as blocked or choked elevators.
- Conduct visual inspections to confirm that raw materials are available.
- Report shortages, irregularities or other production deviations.
- Participate in daily stock counts.
- Maintain good housekeeping throughout the working area.
- Assist with filing, data recording and other reasonable duties.
Accurate reporting is an important part of this position. General Workers should not ignore equipment problems or production irregularities. Prompt reporting allows supervisors and technical teams to respond before an issue results in a longer interruption.
Minimum requirements
Applicants must have:
- Grade 12.
- Basic numerical ability.
- Knowledge of production processes.
- An understanding of workplace health and safety requirements.
Candidates who have worked in a mill, factory, warehouse, manufacturing facility or other production environment may be better prepared for the duties. However, applicants should represent their experience truthfully and should not claim technical skills they do not possess.
4. Forklift Driver Position
The Forklift Driver will be responsible for loading and unloading bagged products while also supporting the mill’s general production requirements.
The position requires more than the ability to operate lifting equipment. The successful candidate must select the correct products and quantities, perform safety inspections and maintain reliable stock information.
Main responsibilities
The Forklift Driver’s duties include:
- Loading the correct products in the quantities ordered by customers.
- Loading and unloading bagged products safely.
- Conducting routine forklift safety checks.
- Reporting faults or safety concerns promptly.
- Ensuring that the forklift has sufficient diesel where applicable.
- Following housekeeping and workplace safety rules.
- Participating in daily stock counts.
- Assisting with the intake of limestone and monocalcium phosphate, commonly referred to as MCP.
- Supporting general production activities when required.
Selecting an incorrect product or quantity can affect customers, stock records and production efficiency. The successful candidate must therefore combine equipment-operating ability with accuracy and good communication.
Minimum requirements
Applicants need:
- Grade 12.
- A valid reach-truck licence.
- A valid counterbalance forklift licence.
- At least six months of similar working experience.
Basic computer literacy will be advantageous. Candidates must also be willing to work shifts, overtime and public holidays according to operational requirements.
Epol is looking for someone who is reliable, honest and capable of working both independently and with a team. Quick problem-solving ability and effective written and verbal communication are also important.
Applicants should check that their operating licences are still valid before applying and should include clear copies if the application system requests them.
5. Maintenance Handyman Positions x 2
Epol has two vacancies for Maintenance Handymen who will provide general repair and maintenance support across the Berlin site.
This is a practical role covering several areas, including electrical work where the employee is appropriately qualified, plumbing, carpentry, painting, waterproofing and basic building repairs.
Tool storage and maintenance
The appointed employees will help ensure that hand tools, power tools and other maintenance equipment remain in safe working condition.
Their duties will include:
- Storing tools and equipment safely after use.
- Monitoring the condition of maintenance equipment.
- Reporting damaged tools to the Maintenance Manager.
- Repairing broken tools where possible and authorised.
- Identifying the correct tools, equipment and materials for each task.
- Requesting a supervisor’s inspection after completing work.
- Carrying out maintenance that reduces downtime or removes safety hazards.
Tool control is important because poorly maintained or incorrectly stored equipment can delay work and create avoidable safety risks.
General repairs and maintenance
The Maintenance Handymen may be required to:
- Replace faulty globes and fluorescent tubes.
- Repair or replace electrical equipment when appropriately qualified.
- Identify and correct safety hazards.
- Assemble and repair furniture or equipment.
- Install appliances and machinery.
- Perform plumbing and carpentry work.
- Work with contractors and other employees.
- Attend to damaged or collapsing ceilings.
- Repair roof leaks and waterproof roofs.
- Paint buildings, equipment, structures and ceilings.
- Replace broken windowpanes.
- Repair or replace doors, hinges and locks.
- Repair paving, fencing and gates.
- Carry out basic bricklaying and plastering.
- Repair leaking gutters and downpipes.
- Complete wall or floor tiling when needed.
Employees must work within the limits of their training and authorisation. Electrical repairs, in particular, should only be performed by someone appropriately qualified and permitted to complete the work.
Safety and quality duties
Maintenance work must comply with the site’s safety, health, environmental, risk and quality requirements.
The appointed candidates will be expected to:
- Maintain a safe and secure working environment.
- Follow occupational health and safety procedures.
- Apply the required Total Integrated Management System documentation.
- Report areas of non-conformance.
- Follow applicable legislative and industry standards.
- Support feed safety and quality requirements.
- Follow relevant ISO quality-control processes.
- Take responsibility for assigned work and meet expected standards.
- Communicate early when a deadline cannot be met or when a task creates additional risk.
Minimum requirements
Candidates must have:
- Grade 12 with Mathematics.
- A valid Code EB driver’s licence.
- At least one year of relevant experience.
- Knowledge of electrical work, plumbing and mechanical maintenance practices.
- An understanding of workplace hazards and safety precautions.
This opportunity is best suited to applicants with broad, practical maintenance experience rather than knowledge of only one type of repair.
6. Working Conditions Applicants Should Consider
Before applying, candidates should consider whether they are comfortable working in an operational mill environment.
Depending on the position, employees may need to:
- Perform physical or manual duties.
- Work around production equipment and moving machinery.
- Follow strict safety and housekeeping procedures.
- Wear required personal protective equipment.
- Work shifts, overtime or public holidays.
- Complete repetitive checks and production records.
- Respond promptly to operational problems.
- Work independently while remaining accountable to supervisors.
- Maintain concentration when loading, counting or repairing equipment.
Candidates should not apply for forklift work unless they hold the required valid licences. Similarly, applicants for the handyman positions should be honest about which repairs they are trained and authorised to perform.
7. How to Prepare a Suitable CV
A clear CV can help recruiters identify whether an applicant meets the requirements.
Applicants should include:
- Current contact information.
- Highest school qualification.
- Mathematics results where relevant to the handyman position.
- Employment history listed from the most recent position.
- Production, warehouse, forklift or maintenance duties previously performed.
- Valid driver’s and equipment licences.
- Computer skills where applicable.
- Safety, first aid or technical training.
- Contactable employment references.
General Worker applicants should emphasise production support, stocktaking, housekeeping and accurate recordkeeping experience.
Forklift Driver applicants should state which machines they are licensed to operate and include the expiry dates of their licences.
Maintenance Handyman applicants should describe practical experience in plumbing, carpentry, painting, tiling, waterproofing, basic construction and mechanical maintenance. They should not claim to be qualified for regulated electrical work unless they hold the required qualification or authorisation.
8. How to Apply for Epol Vacancies
Candidates should apply online through the official application platform:
General Worker: Apply Here
Forklift Driver: Apply Here
Maintenance Handyman: Apply Here
You May Also Be Interested In: Goldi Chicken Vacancies Available
The general application process is as follows:
- Click on “Apply Here”, linking to the position you are interested in.
- Confirm the job title, location and closing date.
- Check that you meet all mandatory requirements.
- Select the apply button.
- Create or sign in to an applicant profile if required.
- Enter accurate personal, educational and employment information.
- Upload an updated CV.
- Attach requested qualifications, licences or supporting documents.
- Review the application before submitting it.
- Save the submission confirmation or reference number.
Applicants should submit separate applications if they wish to be considered for more than one position. Each application should be tailored to the requirements of that particular job.
Candidates should never pay someone to submit an application, secure an interview or guarantee employment. Applications should be completed only through the official recruitment channel connected to the original advertisement.
9. Final Thoughts
These Epol vacancies in Berlin offer practical employment opportunities for candidates with production, forklift or maintenance experience. Applicants should choose the position that matches their qualifications, prepare the required documents and apply through the official recruitment platform before the relevant closing date.
10. Frequently Asked Questions
1. How many Epol vacancies are available in Berlin?
Epol is advertising six positions: three General Workers, one Forklift Driver and two Maintenance Handymen.
2. What is the minimum educational requirement?
All three job categories require a Grade 12. Maintenance Handyman applicants must have passed Mathematics and must also hold a valid Code EB driver’s licence.
3. Do the Epol vacancies require previous work experience?
The Forklift Driver position requires at least six months of similar experience, while Maintenance Handyman applicants need at least one year of relevant experience. The General Worker advert does not specify a minimum period of experience, but applicants need knowledge of production processes and workplace safety.
4. What licences are required?
Forklift Driver applicants need valid reach-truck and counterbalance licences. Maintenance Handyman applicants require a valid Code EB driver’s licence. No specific licence is listed for the General Worker positions.
5. What are the application deadlines?
Applications for the two Maintenance Handyman positions close on 18 September 2026. Applications for the three General Worker positions and the Forklift Driver vacancy close on 25 September 2026.
Leave a Reply